Easy Ring Doorbell Setup Process

Find complete information to configure your Ring Doorbell in easy steps.

Ring Doorbell Setup | WiFi Setup and Troubleshooting Steps Explained

The Ring Doorbell setup is one of the most popular gadgets you can find on the market. Equipped with a host of features like smartphone alerts upon motion detection, live video streaming on your smartphone through the Ring app, and more, the Ring video doorbell can serve as your best companion. In addition, you can not only see clearly in low light using night vision but also speak to visitors using the two-way audio as well. You can connect the doorbell using a wired connection, which makes it even more convenient.

If you have recently purchased a new Ring Doorbell and are looking for information on how to install Ring Doorbell, this page is the right place for you. You will find details on how to proceed with the Ring video doorbell WiFi setup and get done with it in no time.

How Does Ring Doorbell Work?

Your Ring doorbell functions as a smart, WiFi enabled camera and communication system. It helps you send real-time alerts to your smartphone whenever motion is detected or a button is pressed. You can view the live video using the Ring App, speak with visitors on your door using the two-way audio feature and also monitor your doorstep or front porch from anywhere in the world. The only requirement is access to the internet and the Ring setup interface.

The doorbell works by connecting to your home WiFi and uses the PIR passive infrared sensors to detect motion. Once the sensors are triggered, the doorbell sends a notification to your smartphone. You can then tap on the notification to see the live view, use the two-way talk feature or also review the recorded events easily.

The Ring doorbells can be powered using built-in rechargeable batteries or wired into already existing compatible doorbell wiring for continuous, trickle-charged power. Your Ring doorbell can also work with Alexa-enabled devices. This allows the connected Echo devices to act as chimes or also display live video.

Requirements for the Ring Doorbell Setup

To start with the steps to setup ring doorbell, you’ll need the following items in hand:

You’ll also need the Ring App installed on your smartphone. If you are looking to replace your existing doorbell, you can simply remove it from the power connection and connect your new Ring doorbell. If you are wondering how to replace ring doorbell, you can refer to the user manual that comes with the doorbell.

How To Set Up Ring Doorbell?

You can set up ring doorbell using the ring app easily. Here are some steps to follow:

Download the Ring app from your device’s App Store or Play Store. Once downloaded, you can create a Ring account. This will allow you to manage your devices easily. You can also create an Ring account using the Create Account button on the app.
Once you have done that, you can proceed with installing the Power Kit in the Chime box. The power kit will ensure that the Ring Video Doorbell is receiving consistent power and is functioning reliably.
Now, to proceed with the Ring doorbell installation, turn off the power from the mains.
Remove and disconnect the existing doorbell from the point. You can fix a flat mounting plate or use an angled mounting plate. Using the latter will allow you to adjust the field of view for your doorbell.
Follow the instructions in the Ring App to make the wired connections and install the doorbell.
Once done, turn on the main power supply and check the LED on the front panel of the Ring doorbell.

The ring doorbell app setup is now complete. You can now connect your ring doorbell camera to the wifi network at your home.

How to Install Ring Doorbell Wired?

Once you have understood how to setup ring battery doorbell, installing it is pretty simple. You can simply finalise the location where you wish to mount it. Use the mounting plate to mount it, connect it to power, and turn on the power connection. Ensure that the power connections you make are reliable and they are securely attached to the doorbell camera. While the doorbell camera is charging, download the Ring App on your smartphone and create or sign in to the Ring account. Once the doorbell is charged, fix the doorbell to the mounting plate on the door and screw it in place. This will complete the installation steps.

How to Install Ring Doorbell Wireless?

People often ask how to setup a wireless Ring Doorbell, so to answer that, there’s nothing like a wireless Ring Doorbell. It is the method that makes the device work either wirelessly or in a wired manner. For wireless connection, you will need to use fully charged batteries to power your Ring doorbell. Simply insert the batteries in your doorbell and then mount it in its place using the mounting bracket.

You can also choose to use rechargeable batteries or a solar panel along with the rechargeable batteries that will keep charging them when the charging level drops.

Setup Ring Doorbell with Existing Doorbell Wiring

Hardwiring your Ring doorbell is a solid step that enables the doorbell to operate without a battery. You can connect using a wired connection using the following steps:

Setup Ring Doorbell Without QR Code

Sometimes, completing the setup process might require access to the QR code on the top. The app scans the QR code and then adds it to the account. However, if you do not have a QR code, you can still set things up. Here are some steps on how:

Open the Ring app and tap on Set up a Device.
When you are asked to scan the QR code, choose Setup without scanning option. The app will ask you to choose the doorbell model manually.
Press and hold the setup button on the doorbell until you see the light start to spin.
The app will now guide you through connecting to the WiFi connection and finish the setup process like normal. The setup process will be a longer one now but painless.

Ring Doorbell WiFi Setup

You can connect your Ring essential wired video doorbell to the WiFi network at your home easily. But first, you’ll need to connect your smartphone to the same wifi network. Make sure you connect it to the 2.4GHz network band.

Once done, launch the Ring app and log in to the Ring account.
Tap on Settings and then click on the My Devices button.
Now, click on the Add New Device button and then select the Doorbells and Chimes option.
In this window, click on the Video Doorbell option.
If Ring detects a SmartHub or BaseStation device, tap on Connect without SmartHub or select Connect without a Base Station option.
Now, the Ring app will walk you through the steps to connect the doorbell directly to the 2.4GHz network band.

The Ring Video Doorbell Setup is now complete. Some models of ring doorbells may also initiate Ring firmware update process upon this stage. When this happens, allow the devive to update the firmware to latest version and do not turn it off. The device will auto-reboot and then connect to WiFi.

Setup Ring Doorbell Using Mobile Hotspot

Ring doorbell setup using a mobile hotspot connection works when your home WiFi is down and you are installing the device temporarily. You can start by enabling the hotspot on your smartphone and keep the phone close to the Ring Doorbell. Open the Ring App and tap on Setup a Device. Now, choose your Ring Doorbell model. When the app asks for a WiFi network, select the mobile hotspot name that belongs to your smartphone from the list.

Now, simply type in the password to the hotspot network as you would for a WiFi. Ensure that the WiFi stays active during the entire setup process. Once the Ring doorbell connects successfully, you can access the live view and other basic features using mobile data. If you later decide to switch to home WiFi, you’ll need to update the network settings by logging in to the Ring App. Use the Ring login page to do that.

Setup Ring Doorbell Using Chime

You can use a Ring chime to hear alerts inside the house without relying on your smartphone. Here are some basic steps you can follow:

Plug in the Ring Chime and set it up in the Ring app. Select Add a Device and follow the on-screen steps. Make sure the Chime is connected to the same WiFi network as your Ring Doorbell.
Once both devices are online, open the app and then go to the Doorbell settings. Select Chime Connections and enable the alerts for doorbell rings and motion detection.
The ring doorbell chime setup process steps are now complete.You can test the feature by pressing the doorbell. If the chime rings, you’re good to go.

Setup Ring Doorbell After Reset

Sometimes, your Ring doorbell can act up and cause trouble, forcing you to reset doorbell it to factory settings. To ensure it works to your satisfaction, you can follow these simple steps:

Press and hold the setup button on the Ring doorbell for about 15-20 seconds until the light flashes or spins. This helps restore the device to factory settings.
After the reset process is complete, launch the Ring app and then tap on Setup a Device. Follow the normal seup steps and reconnect the doorbell to the WiFi network at your home.
You may choose to rename the doorbell to anything you like and reconfigure additional settings like motion sensitivity, etc.

Setup Ring Doorbell On A New Wi-Fi Network

If for some reasons, you have to change the WiFi network at your home, you will need to reconnect the doorbell to the new wifi so it can function without issues. Here are some steps you can follow to connect your Ring doorbell to a new WiFi network:

Open the ring app and tap on your ring doorbell.
Go to the Settings and select Network Settings. Here, select Change Network.
When asked, put the ring doorbell in set up mode by pressing the Setup button on the same.
You can now connect the doorbell to the new WiFi network using the app. Wait for the app to confirm the connection.
Once completed, your Ring Doorbell will resume normal operation on the new network. It doesn’t require you to reinstall the device, and there is no drama involved.

How To Setup Ring Doorbell On Echo Show?

Echo Show devices are powered by Amazon’s voice assistant- Alexa. You can connect the ring doorbell to echo show easily using your Amazon account. Here are some steps you can follow:

Open the Alexa App and tap on the Search icon. Type Ring Skills and tap on Ring Skill.
From the page that opens up, tap on Enable to Use.
Select the Enable Skill & Link Accounts option and sign in to the ring account. Alexa will ask your account credentials to connect new devices to the same and help you control them using voice commands.
Now, go to Devices and then tap on the + icon. Again, tap on the Add Device button and then select the Camera button and then select Ring button again.

Alexa will now discover your ring doorbell and help you customise its settings inside the app. You can name your device and assign it to a room. You can check if the two are connected by asking Alexa to show the live feed from the doorbell on echo show. If you see the same, the connection is successful.

Most common Ring Doorbell Setup Issues And Easy Fixes

Even though the Ring doorbell setup process is simple and beginner-friendly, things may not always go the way you want. WiFi issues, app glitches, and power related issues can interrupt the Ring Doorbell or Ring camera setup process and leave you stranded midway. Hence, here are some easy steps to troubleshoot the most common issues you might face with your doorbell models including Ring Doorbell Pro, Ring Doorbell Plus, and Ring Video Doorbell Devices:

Ring Doorbell Setup Button Not Working

If you find the ring doorbell setup not working, it is a signal that the device is unable to enter the setup mode. You can start by checking the power connections. If you are on battery, ensure that it is fully charged.

Press and hold the setup button for about 15-20 seconds until the light starts to spin or flash on the button. If nothing helps, you can try resetting the device and then continue with the steps for setup ring doorbell manual process using the app. To reset the device, you can remove the same from the account. Log in to the app to know how to remove ring doorbell from the account and then proceed with the reset process.

Ring App Can’t Find the Device

Connectivity issues with your Ring doorbell can bring up issues like ring app can’t find the device. To ensure you don’t face such issues, always turn on Bluetooth on your smartphone. Stand close to the doorbell when you are connecting to it.

Ring Doorbell Not Connecting To WiFi During Setup

Most people don’t know, but the Ring doorbell devices only connect to the 2.4GHz network band of a network. So, if your ring doorbell is not connecting to the wifi network, ensure you are connecting to the 2.4GHz network band only. Secondly, check if you are using the correct WiFI network password to connect to the same. Use the correct combination of the characters, letters, numbers, symbols, and other things to complete the setup process.

Also take care of issues like Weak network signals, VPNs, that can interfere with the ring doorbell WiFi setup process. Try restarting your router and reconnecting to it using the app.

Ring Doorbell Keeps Saying Setup Not Complete

If your Ring Doorbell app keeps saying that the setup is not complete, it means that the WiFi setup process didn’t complete successfully. This usually happens when the network drops during the installation process. To ensure you don’t face issues with the doorbell, you can restart the doorbell and confirm access to the WiFi network using the correct WiFi credentials. While you are connecting, stand close to the router network range and complete the ring video doorbell WiFi setup to resolve the issue.

QR Code Not Scanning

If the Ring App is unable to scan the QR code, you can try bringing the camera closer to the code and checking if the light is adequate enough to scan the same. If the camera is still unable to scan the code, you can proceed with adding the camera without the code. Simply tap on Not Working? Option or Other options on the app. The app will now ask you to enter the 5-digit PIN or serial number from below the QR code on the doorbell camera in the app.

Once you have added the serial number, the doorbell will be added to the Ring Account.

Ring Doorbell Setup Freezes or Fails

If your Ring doorbell setup freezes or fails, it might be due to connection issues, and incorrect WiFi password, or may be power problems. You can perform a hard reset if the issue persists. Remove the doorbell from the mounting bracket and hold the orange button on the back for about 20 seconds. Release it after this and allow the light to stop flashing. Once done, setup the doorbell again to use it.

If resetting the doorbell doesn’t help, you can also force manual WiFi connection. When the app asks you to join the Ring setup network, exit the app and head to the phone’s Settings and select WiFi.

Here, select the network manually that starts with Ring or Chime prefix. Once connected, go back to the Ring app to complete the setup process.

Poor Video or Delayed Notifications

Start by rebooting the ring doorbell and the router as well. Issues with the app, notification settings and the internet can all contribute to delayed notifications or no notifications at all. Ensure that the app is updated to the latest version and is working fine. Also log in to the device settings and see if the Ring App has permissions to show notifications. If not, enable the same and restart the app once. This will fix the issues in no time. If you think slow internet speed has to do something about the notifications, you can restart the router and follow the router specific troubleshooting steps.

Battery Drains Quickly

Features like motion detection, poor WiFi, cold weather, high power settings like frequently checking live view, using two-way communication feature, can all consume battery significantly. To fix the issues, you can reduce motion sensitivity so that you only receive alerts when it is very important. You can also lower the recording length of videos, disable Snapshot capture and ensure the WiFi connection is strong and working at all times.

Weak or No Video Signal

This issue is common due to poor WiFi connectivity, insufficient battery or lowe power being supplied to the unit. Therefore, always ensure that the camera is connected securely to the wifi network at your home, has good amount of battery charging level to work adequately and there are no power related problems.

Incorrect Login or Account Issues

Always ensure that you are using the correct account credentials to login to the ring doorbell account. Manually type the credentials to avoid autofill errors and reset the password using the app if necessary. If you notice that problems with login are still there, you can clear the app cache and cookies on the browser. You can also try to use a different device and ensure that the VPN on your computer or smartphone is inactive at all times.

Ring Doorbell Not Powering On

If the Ring doorbell won’t power on, check the wired connections you have made to the doorbell. If you are using a battery powered model, ensure that the batteries are charged to full. If not, you’ll need to replace them with new ones and then restart the doorbell to see if they work. For wired devices, you can check the transformer and circuit breaker to rule out the chances of issues there.

Motion Detection Not Working After Setup

In case the motion detection feature not working even after setup, you’ll need to check if the motion detection settings are configured correctly. You can use the ring doorbell login page to sign in to the ring account and check the settings. Enable the motion lerts, adjust the zones, and ensure that the detection is turned on as well. This will help prevent issues with motion detection and alerts.

Ring Doorbell Offline After Setup

If the Ring doorbell is offline after setup, it means that the WiFi connection has dropped. You can now restart your router and reconnect the device through the app’s network settings. Keep the doorbell within strong signal coverage to avoid repeated ring doorbell setup issues. If you still need help troubleshoot ring doorbell setup issues, you can reset the device and then reconfigure it.

FAQs

Where is setup button on ring doorbell?

The location of the setup button depends on the model you are using. On most ring doorbells, the button can be found on the back of the device. For other models, you can locate the same inside the battery compartment or under the faceplate as well. Press and hold this button to put the device into setup mode and prevent any setup related issues.

Does Ring Doorbell work with Google Home?

Yes, Ring doorbell works with Google Home for the basic features. You can receive motion alerts and see the live video feed on compatible Google displays. The full functionality of the doorbell is limited when compared to Alexa-enabled devices.

Does Ring Doorbell require a subscription?

For normal usage, no. You won’t require a subscription to use ring doorbell. You can configure the doorbell as you normally do and access live video, receive motion alerts, and use the two-way talk feature without paying for anything. A subscription is optional to check video history and use advanced features.

What Wi-Fi is required for Ring Doorbell?

Ring doorbells connect to the 2.4GHz network band of your home wifi network. New and latest models may support the 5GHz network band as well. It is advised to check the user manual of your specific ring doorbell to see what wifi band it supports.

Can I set up Ring Doorbell without a subscription?

Yes, you can always complete the Ring Doorbell setup without a subscription. The device will continue to function normally for live view, motion alerts, and two-way audio as well. Subscription is required if you want to use the video recording feature or access the event history.

Does Ring Doorbell have a monthly fee?

Ring doorbell has no monthly fee. Optional subscription plans are always available if you want features like video storage and playback. If you decide to skip the plan, your Ring doorbell camera setup will still work for basic real-time monitoring features.

Can I install Ring Doorbell without existing wiring?

Yes, you can install a Ring Doorbell without existing wiring. Battery-powered models are designed for wireless installation and are ideal for apartments or rentals. This feature makes ring doorbell setup easy even when your home doesn’t have a traditional doorbell system in place.

How to turn off ring doorbell without app?

If you are looking to turn off the ring doorbell without using the app, you can disconnect it from the power connections by removing the batteries. You can also turn off the circuit breaker for wired models and disconnect the WiFi connections. If you are using a battery-operated model, you can remove the security screws on the bottom and remove the faceplate to remove the battery pack. This way the doorbell will be turned off.

How to setup a ring doorbell that's already installed?

If you are looking to set up a doorbell that’s already installed, you can download the Ring App and select the Setup a Device option from the screen. You can remove the doorbell using a screwdriver and then scan the QR code from the rear panel. The app will now guide you through the steps for transfer. Once a request is triggered, contact the previous owner and ask them to approve the request. Once approved, the device will be released to you and you can install it at your end.

Need more help with Ring Doorbell Setup process?

Get in touch with the expert team at our end, today!